Hotchkis 2290 SSR Sway Bar Set Manuel d'utilisateur

2290 FRONT AND REAR SPORT STABILIZER BAR SET Chevy SSR Thank you for your purchase from our line of classic suspension parts. Please

received at Hotchkis Performance, we will evaluate the products, verify the sales receipt, and investigate the warranty claim. Any repaired or replac

4) Remove the subframe mounts on each side using a 15mm socket and a swivel adapter. There are 2 bolts per mount. Save the bolts for reinstallatio

6) In order to slide the stabilizer bar out, you will need to remove the X-brace and heat shield near the middle of the bar to give you more room. F

11) Install the provided polyurethane bushings onto the bar. Try to install the bushing so that the split is facing the front of the vehicle. Remem

Please call us at (877) 4NO-ROLL if you have any questions regarding the service or installation of your Hotchkis Performance products. • This ins

7) Use the grease pack provided to apply a thick coat of grease to the inside of the sway bar bushings. Slide the bushings over the bar and place the

2290 FRONT AND REAR SPORT STABILIZER BAR SET Chevy SSR Parts List o Visit Hotchkis Tuning on the net at www.hotchkis.net for more Hotchkis P

Hotchkis Performance LLC Return Policy & Limited Warranty Effective December 1, 2010 all Hotchkis products must be registered to qualify for

of any salesperson do not constitute part of this limited warranty and cannot be relied upon as a warranty. THERE ARE NO WARRANTIES, EXPRESSED OR IMP