Sport Sway Bar Kit (22425) Scion tC Thank you for your purchase from our new line of Scion tC parts. Please call us at (877) 4NO - ROLL
8) Place the provided bushing bracket over the bushing and set the sway bar into it’s proper position. Install the provided nut and bolt & flat
Sport Sway Bar Kit Scion tC Hotchkis P/N Item Description Quantity1 22820271 Front Anti Roll Bar, Scion tC 12 22920271 Rear Anti Roll Bar, Sci
Hotchkis Performance LLC Return Policy & Limited Warranty Effective December 1, 2010 all Hotchkis products must be registered to qualif
FULLEST EXTENT PERMITTED BY LAW. THIS WARRANTY DOES NOT COVER CONSEQUENTIAL DAMAGES, LOSS OF TIME OR REVENUES, INCONVENIENCE, LOSS OF USE OF THE VEHIC
3) Use a 19mm Socket to remove the 2 nuts in the front and 8 bolts in the rear of the cradle. 4) Use a 14mm Socket to remove the 3 Nuts and
5) Remove the front splashguard by removing a series of plastic fasteners and bolts. Use a 10mm socket or screwdriver to remove the bolts. Use a
8) With all the nuts & bolts removed the cradle should droop loosely enough to reach the sway bar mounted to the top rear portion of the cradle.
Use the provided flat cut washers with the OEM bolts 11) Steps for reinstalling the cradle: 1 – Install the 2 rear cradle bolts. It might be d
3 – Install the 2 bolts that secure the cradle bridge bracket to the radiator support. Torque to 29 ft-lbs. 4 – Install the nuts & bolts to
12) Once the cradle is reinstalled, attach the end links to the sway bar and torque the nuts to 32 ft-lbs. For adjustable sway bar stiffness, refer
INSTALLATION OF HOTCHKIS REAR SWAY BAR 1) Securely block the front wheels of the vehicle. Use a jack to lift up the rear of the vehicle and suppor
5) With the stock sway bar removed, set your new Hotchkis bar next to it for reference and orientation. 6) Install your new Hotchkis sway bar in
Commentaires sur ces manuels