Audi A6Q(’00+) S6 #22822 Front and Rear Sway Bar Kit Installation Instructions Tools Required: Included In Kit: 1/ 4-Post Lift or Floo
4/ Remove the four bushing bracket nuts and bolts (13mm wrench) attaching the anti-roll bar brackets to the sub-frame and save. 5
7/ Repeat same pressure to the exhaust and position Hotchkis bar (without the bushings and brackets) in the stock location with the “HSport” sticker
*Adjustability Note: To adjust between the two holes, you must unbolt the bushing bracket bolts and pull the bar towards the rear so that the end
2/ Once vehicle is raised, use a standard screwdriver and remove the aero-pan fasteners. Then remove the pan entirely exposing the anti-roll bar.
7/ Re-install the bracket nuts and tighten. Use a small portion of blue thread-locker on the end-link bolts , re-install and tighten well. **
Hotchkis Performance LLC Return Policy & Limited Warranty Effective December 1, 2010 all Hotchkis products must be registered to qualify for
This limited warranty is the entire and only warranty for the products and may not be modified or supplemented by any other person or company in any f
SANTA FE SPRINGS, CA 90670 Hotchkis Performance will not accept product returns without the RGA number, receipt and the information described above.
Commentaires sur ces manuels