Hotchkis 1803A Rear Suspension Package, Adjustable, 68-72 G Manuel d'utilisateur

1201AA 78-88 GM A/G-BODY Double Adjustable Trailing Arms Thank you for your purchase from our new line of GM parts. Please call us at (877) 4NO-R

This limited warranty is the entire and only warranty for the products and may not be modified or supplemented by any other person or company in any f

HOTCHKIS PERFORMANCE, LLC C/O CUSTOMER SERVICE 8633 Sorensen Avenue SANTA FE SPRINGS, CA 90670 Hotchkis Performance will not accept product returns

+ 1401 / 1402 / 1403 ADJUSTABLE TRAILING ARM MOUNT BRACES 1401 – 78-88 GM A/G-BODY / 1402 – 68-72 GM A-BODY / 1403 – 64-67 GM A-BODY Thank you

5) Using the jack placed under the differential, raise the rear suspension to its approximate ride height. The braces are generally easier to install

8) The brace can now be installed by sliding it over the bolts. The braces connect the upper and lower trailing arm frame mounts as indicated by the

9) Adjust the length of the brace as necessary. Loosen the jamb nut on the brace with 15/16” wrench to allow the head to move. Rotate the head clockw

11) Once the braces are installed, place one drop of Loctite on the trailing arm bolt threads. Tighten the washers and nuts. Torque the nuts to 60 f

Hotchkis Performance LLC Return Policy & Limited Warranty Effective December 1, 2010 all Hotchkis products must be registered to quali

This limited warranty is the entire and only warranty for the products and may not be modified or supplemented by any other person or company in any f

Hotchkis Performance will not accept product returns without the RGA number, receipt and the information described above. C.O.D. or collect shipments

SETTING PINION ANGLE It may be necessary to set pinion angle after installation of your new Hotchkis upper trailing arms. First of all, what is pi

The simplest rule of thumb is: The centerline of the differential pinion should be parallel to the centerline of the engine’s crankshaft without bein

If there is vibration during braking, then the pinion angle is set too low! Fine tune your Hotchkis trailing arms to achieve the perfect sett

Hotchkis Performance LLC Return Policy & Limited Warranty Effective December 1, 2010 all Hotchkis products must be registered to qual

FULLEST EXTENT PERMITTED BY LAW. THIS WARRANTY DOES NOT COVER CONSEQUENTIAL DAMAGES, LOSS OF TIME OR REVENUES, INCONVENIENCE, LOSS OF USE OF THE VEHIC

1301 / 1302 / 1305 / 1306 INSTALLATION INSTRUCTIONS THANK YOU FOR CHOOSING HOTCHKIS PERFORMANCE PRODUCTS Removal of Stock Lower Trailing Arms 1)

9) Place one drop of blue Loctite on clean threads and torque sway bar nuts to 35 ft./lbs. Note: Loctite 10) The holes located on the Hotchkis Perfor

Hotchkis Performance LLC Return Policy & Limited Warranty Effective December 1, 2010 all Hotchkis products must be registered to qualify for