Hotchkis 22835F BMW E36 Front Sway Bar Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Hotchkis 22835F BMW E36 Front Sway Bar. Hotchkis 22835F BMW E36 Front Sway Bar User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 12
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Thank you for your purchase from our new line of BMW parts.
Please call us at 877 - 4NO - ROLL if you have any questions
regarding the service or installation of your Hotchkis Performance products.
1F
Raising Vehicle
Raise front of the vehicle by using a 4 post lift or drive-on ramps. Securely block the rear
wheels of the vehicle. You do not have to remove the front wheels
2F
Remove OE Front Bar
a) Disconnect the sway bar end links from the sway bar ends.
b) Undo the bushing brackets by unfastening the 2 nuts for each bracket
c) Bar should be loose from the vehicle. Note the OE orientation for reference.
Installation of Hotchkis Front Sway Bar
Sport Sway Bar Kit 22835
91-99 BMW E36 M3
Vue de la page 0
1 2 3 4 5 6 ... 11 12

Résumé du contenu

Page 1 - 91-99 BMW E36 M3

Thank you for your purchase from our new line of BMW parts. Please call us at 877 - 4NO - ROLL if you have any questions regarding the service or

Page 2 - Sway Bar Stiffness

13R Finish Up Re-attach the exhaust and make sure everything else is fully tightened. 14R Stiffness Adjustment Your Hotchkis rear bar has 2

Page 3 - Remove Stock Bar

Hotchkis Performance LLC Return Policy & Limited Warranty Effective December 1, 2010 all Hotchkis products must be registered to qual

Page 4 - Install the End Link Assembly

DAMAGE TO THE VEHICLE OR COMPONENTS OF THE VEHICLE, ANY OTHER TYPE OF CONSEQUENTIAL DAMAGES, OR OTHER INCIDENTAL OR INDIRECT DAMAGES. HOTCHKIS’ MA

Page 5

3F Reinstall the Hotchkis Front Bar Reinstall the Hotchkis Front sway bar in the same manner as removal. The Hotchkis front kit comes with new po

Page 6 - Install the Bushings

1R Raising Vehicle Raise rear of the vehicle by using a 4 post lift or drive-on ramps. Securely block the front wheels. You do not have to remo

Page 7 - Insert Spacer Shim

4R Assemble New End Links With the new end links off the old bar, install the clevis brackets onto the Hotchkis end link as shown below. You wi

Page 8

6R Install the Bushing Mount Reinforcement Bracket Due to the weak design of the BMW bushing mount, extra reinforcement is required. Your kit i

Page 9

7R Position the Sway Bar Insert and position the sway bar in the same manner as stock removal. 8R Install the Bushings Grease the inner sur

Page 10 - Stiffness Adjustment

9R Position Bushing Bracket Push on the bushing bracket onto the 2 bushings. Do not fasten any hardware at this time. 10R Insert Spacer Shim

Page 11

11R Install Bushing Bracket Hardware Install the bushing bracket hardware included in your kit. The bushing brackets have slots in them so you

Page 12

Once the gaps are equalized, grease the end link bushings and fully tighten the hardware including the jam nut that fastens the heim joint to t

Commentaires sur ces manuels

Pas de commentaire