Hotchkis 2280 CTS-V Sport Sway Bars Manuel d'utilisateur

Anti-Roll Bar Set # 2279, 2280 2003+ Cadillac CTS V6 & CTS-V Thank you for your purchase from our new line of CTS parts. Please call

You are now finished with the rear sway bar installation! Make sure that all hardware is fully tightened before driving the vehicle. Enjoy your new

Hotchkis Performance LLC Return Policy & Limited Warranty Effective December 1, 2010 all Hotchkis products must be registered to

COMPONENTS OF THE VEHICLE, ANY OTHER TYPE OF CONSEQUENTIAL DAMAGES, OR OTHER INCIDENTAL OR INDIRECT DAMAGES. HOTCHKIS’ MAXIMUM LIABILITY UNDER THIS W

» Undo the sway bar end link nut using a 15mm socket. Retain this hardware for later use. » Peek inside the wheel well and locate the subfra

Remove the subframe brackets and bushings. You may discard the bushing and bracket, but keep the 2 forward bolts for later use. » Turn

» Fish the Hotchkis bar in the same way as stock removal. » We provide you with new bushings, brackets and an adapter block that replaces the st

» Reattach the end links to the sway bar ends using the stock hardware. Fully tighten end link nuts. You are now finished with the front

INSTALLATION OF HOTCHKIS REAR SWAY BAR » The ideal way to install the rear sway bar is doing so while the suspension is at ride height.

» The exhaust system will need to be dropped in order to remove the sway bar. First spray some WD-40 on the rubber hangers that hold the mufflers a

» Install the Hotchkis sway bar in the same manner as removal. Make sure the hoop in the center dips downward as shown below. » Lube the inside

» Reattach the end links to the sway bar ends using the stock hardware. Fully tighten end link nuts. » Reattach the exhaust hangers and instal